|
| |
Specifications for PRO 5000 ozone generator
Generation method: Corona
discharge utilizing mica plate technology.
Supply Gas: Ambient Air
Max. ozone output: 5000 mg/hr
Control options: On off push button switch standard on all models.
- PRO 5000 (Fully variable ozone output control)
- PRO 5000 TV12 (12 hr timer in addition to the variable ozone output
control)
- Secure mounting brackets available for all above models
Dimensions: 21"LX 5"W X 6.25"H / 158mm H X 128mm W X 525mm L
Electrical: 120 Volt, .8 Amp, 100 Watt, 50 - 60Hz
Fan Size: 105 cfm
Construction: Stainless steel inner chassis with a high impact
extruded PVC cabinet.
Special features: The PRO 5000 comes equipped with 4" ozone output
and fresh air input spouts. These "spouts" will hook up to a drier vent hose
or 4" thin wall sewer pipe. This feature allows the installer the route clean
dry air into the ozone generator or route the ozone to where it is needed.
- Secure mounting brackets optional available.
Maintenance: Under normal 24 hr/day use the PRO 5000 ozone
generator should be cleaned every four to eight weeks using dish soap, water
and a tooth brush. Cleaning frequency is highly dependant on the humidity
level of the air that the ozone generator receives.
Warranty: The PRO 5000 is warranted against defects in materials
and workmanship for a period of four years from
date of purchase. Liability is limited to parts and labour only. Shipping is
the sole responsibility of the customer. Crystal Air is not liable for damage
caused by shipping, misuse, neglect or lack of regular maintenance.
Uses: This unit is a high output unit designed for the professional
service technician. All generator plates must be used. Failure to use all
plates could cause damage to generator plates, transformer, etc.. Ideal for
use in garbage transfer stations, restoration work, commercial manufacturing,
barns, etc.
| |
|