Specifications for PRO 3600-1 ozone generator
- Supply Gas: Ambient Air
- Max. ozone output: 1000 mg/hr up gradable to 3600 mg/hr by the addition of four more generator plates
- Control options: On off push button switch standard on all models.
- - PRO 3600-1 (Fully variable ozone output control)
- - PRO 3600-1 TV12 (12 hr timer in addition to the variable ozone output control)
- - Secure mounting brackets available for all above models
- Dimensions: 21"LX 5"W X 6.25"H / 158mm H X 128mm W X 525mm L
- Electrical: 120 Volt, .5 Amp, 60 Watt, 50/60Hz
- 240 Volt, .2 Amp, 50 Watt, 50/60Hz
- Fan Size: 105 cfm
- Construction: Stainless steel inner chassis with a high impact extruded PVC cabinet.
- Special features: The PRO 3600-1 comes equipped with 4" ozone output and fresh air input spouts. These "spouts" will hook up to a drier vent hose or 4" thin wall sewer pipe. This feature allows the installer the route clean dry air into the ozone generator or route the ozone to where it is needed.
- - Secure mounting brackets optional available.
- Maintenance: Under normal 24 hr/day use the PRO 3600-1 ozone generator should be cleaned every four to eight weeks using dish soap, water and a tooth brush. Cleaning frequency is highly dependant on the humidity level of the air that the ozone generator receives.
- Warranty: The PRO 3600-1 is warranted against defects in materials and workmanship for a period of four years from date of purchase. Liability is limited to parts and labour only. Shipping is the sole responsibility of the customer. Crystal Air is not liable for damage caused by shipping, misuse, neglect or lack of regular maintenance.
- Uses: The PRO 3600-1 is designed as an up gradable ozone generator. It comes equipped with one generator plate that allows for 1000 mg/hr. If the unit is found to be not quite large enough simply add up to four gen. plates increasing output to 3600 mg/hr. Ideal for use in garbage compactors, restoration, auto detailing, etc.